Get-Ad Free Access: Join Today!

Kremer K2 (Porsche 935)

Kremer K2 (1977)

Upon seeing the factory 935s and what was possible using the 930 platform, the Kremer bothers from Cologne built up their own version. Their first car contested the World Championship of Makes in 1976 and in the following year, an updated version known as the K2 was further modified.

Compared to the Porsche 935, the Kremer version was much more slab sided and featured fences along the top of the rear fender to direct air to the rear wing. Many of the details found on the K2 were directly ported over to the much more successful K3. These included the reshaped rear profile which used a second window and running boards which better controlled air underneath the car. Unlike Porsche’s fibreglass, Kremer opted for Carbon-Fiber/Kevlar composite. These were made by Design Plastics.1

The K2 is distinguished by its short cut-off front nose section with square headlight housings. It was first driven by Bob Wollek in Vaillant and was quite successful in the 1977 German Nation Championship. The following two years it was contested by Team Willeme and won nearly 20 races.

Specs & Performance

type Racing Car
built at Germany
production 1 unit
engine Type 930/72 Boxer-6
position Rear, Longitudinal
aspiration KKK Turbocharger
block material Aluminum
valvetrain SOHC, 2 Valves perCyl
fuel feed
Bosch Mechanical Fuel Injection
displacement 2856 cc / 174.28 in³
bore 92.8 mm / 3.7 in
stroke 70.4 mm / 2.8 in
compression 6.5:1
power
417.6 kw / 560 bhp @ 8000 rpm
specific output 196.08 bhp per litre
bhp/weight 622.22 bhp per tonne
torque
587.1 nm / 433 ft lbs @ 5400 rpm
body / frame
Unitary Steel Monocoque w/Fiberglas Panels
driven wheels RWD
front brakes
Ventilated Discs w/4-Piston Calipers
rear brakes
Ventilated Discs w/4-Piston Calipers
front wheels
F 40.6 x 26.7 cm / 16 x 10.5 in
rear wheels
R 48.3 x 38.1 cm / 19 x 15 in
steering Rack & Pinion
f suspension
MacPherson Struts w/Bilstein Dampers, Adjustable Anti-Roll Bar
r suspension
Double Wishbones w/Bilstein Dampers, Adjustable Anti-Roll Bar
curb weight 900 kg / 1985 lbs
weight distro 40 % / 60 %
wheelbase 2271 mm / 89.4 in
front track 1501 mm / 59.1 in
rear track 1557 mm / 61.3 in
length 4681 mm / 184.3 in
width 1971 mm / 77.6 in
transmission 4-Speed Manual

Pictures

Specs & Performance

type Racing Car
built at Germany
production 1
engine Type 930/72 Boxer-6
position Rear, Longitudinal
aspiration KKK Turbocharger
block material Aluminum
valvetrain SOHC, 2 Valves perCyl
fuel feed Bosch Mechanical Fuel Injection
displacement 2856 cc / 174.28 in³
bore 92.8 mm / 3.7 in
stroke 70.4 mm / 2.8 in
compression 6.5:1
power 417.6 kw / 560 bhp @ 8000 rpm
specific output 196.08 bhp per litre
bhp/weight 622.22 bhp per tonne
torque 587.1 nm / 433 ft lbs @ 5400 rpm
body / frame Unitary Steel Monocoque w/Fiberglas Panels
driven wheels RWD
front brakes Ventilated Discs w/4-Piston Calipers
rear brakes Ventilated Discs w/4-Piston Calipers
front wheels F 40.6 x 26.7 cm / 16 x 10.5 in
rear wheels R 48.3 x 38.1 cm / 19 x 15 in
steering Rack & Pinion
f suspension MacPherson Struts w/Bilstein Dampers, Adjustable Anti-Roll Bar
r suspension Double Wishbones w/Bilstein Dampers, Adjustable Anti-Roll Bar
curb weight 900 kg / 1985 lbs
weight distro 40 % / 60 %
wheelbase 2271 mm / 89.4 in
front track 1501 mm / 59.1 in
rear track 1557 mm / 61.3 in
length 4681 mm / 184.3 in
width 1971 mm / 77.6 in
transmission 4-Speed Manual